24
REPAIR AND WARRANTY
REPAIR
The repair/replacement of the following parts can be made by the owner’s qualied
personnel:
• Signal cable plugs on the machine, blasting hose and blasting gun.
• Blasting hose couplings on the machine, hose and gun.
• Electricity and compressed air sockets on the rear of the machine.
When making repairs/replacements, use only
original IceTech spare parts.
TERMS OF WARRANTY
In order for us to provide you the best customer support and notify you of product
improvement updates, please ll Warranty Registration Form on our homepage:
www.icetechworld.com.
In order to comply with the terms of the warranty, and for safety reasons, repairs
other than those stated above require relevant tools and equipment and therefore
must always be made either by an IceTech technician or by the owner’s qualied
personnel who have been trained by IceTech in the repair and maintenance
of IceTech dry ice blasting machines and accessories. Beyond the necessary
knowledge, the person concerned must have appropriate tools and equipment, as
well as the auxiliary materials required, at his disposal.
The liability of the manufacturer under the terms of the CE and cUL endorsement
in regards to safety may become invalid:
• If repairs are made using non-IceTech spare parts.
• If repairs are made by unqualied personnel.
• If repairs are unsatisfactory due to lack of relevant tools and equipment.
In such cases, the liability of the manufacturer will be solely conned to any
manufacturing faults/errors made prior to the machine being delivered and before
repairs/ replacements have been made.
To Next Page
Loading...
