IceTech PR350H - Page 148

Holtec Automatic A/S
Agervigvej 46, Næsbjerg
68oo Varde
Tlf. +45 76767676 Fax. +45 76767677
e-mail: holtec@holtec.dk
Project title: 11kW Dryice Pelletizer PR350
Case no.: PR750H / PR350H
Page 1 of 56
Last print: 1/6/2011 3:50:48 PM
Last edit: 9/12/2011
Customer: IceTech A/S
PC|SCHEMATIC Automation File name: F:\Projekt\Ice-Tech\2011\IT1103 PR350H\Documentation\PDF\IT1103
Page title: EC Declaration of Conformity
Project rev.:
Last rev.:
Number of pages: 73
EC Declaration of Conformity
B
EC Declaration of Conformity for Components
Directive 98/37/EC, Annex II, B
Manufacturer: Holtec Automatic A/S
Agervigvej 46
6800 Varde, Næsbjerg DK
Tlf.: 76767676
Herewith declares that: Control Panel IT1007 for Icetech Dryice Pelletizer
is intended to be incorporated into machinery or to be assembled with other machinery to
constitute machinery covered by Directive 98/37/EC
does therefore not in every respect comply with the provisions of this directive
does comply with the provisions of the following other EC directives & harmonized standards
EC-directives & standards: DS/EN ISO 12100-1:
Safety of machinery. Basic concepts, general principles for design.
Part 1: Basic terminology, methodology.
DS/EN ISO 12100-2:
Safety of machinery. Basic concepts, general principles for design.
Part 2: Technical principles.
DS/EN 60204-1:
Safety of machinery - Electrical equipment of machines.
Part 1: General requirements.
DS/EN 1050:
Safety of machinery – Principle for risk assessment.
DS/EN 954-1:
Safety of machinery – Safety related parts of control systems.
Part 1: General principles for design.
All electrical components, used in the control panel are individually CE-marked, and complies with
the following standards regarding EMC
89/336/EEC last edition (EMC directive)
DS/EN 61000-6-4:2001:
Electromagnetic compability (EMC) Part 6-4: Generic standard.
Emission standard for industrial environments.
DS/EN 61000-6-2:2005:
Electromagnetic compability (EMC) Part 6-2: Generic standard.
Immunity standard for industrial environments.
DS/EN 60439/1:
Low-voltage switchgear EMC environment 2
And furthermore declares that it is not allowed to put the machinery into service until the machinery
into which it is to be incorporated or of which it is to be a component has been found and declared
to be in conformity with the provisions of Directive 98/37/EC and with national implementing
legislation i.e. as a whole, including the machinery reffered to in this declaration.
Place: Agervigvej 46, 6800 Varde DK
Date: Monday, 12 September 2011
Signature: Gert Jessen Electrical hardware engineer