Mobil DTE 10 Excel™ Series
Industrial Mobil, United States
Premium Quality Hydraulic Oils
Mobil DTE 10 Excel™ Series are high performance anti-wear hydraulic oils specifically designed to meet the
needs of modern, high pressure, industrial and mobile equipment hydraulic systems.
The Mobil DTE 10 Excel Series is constructed from selected base oils and a proprietary additive system to
provide well balanced performance in a range of applications. The products exhibit outstanding oxidation and
thermal stability allowing long oil life and minimized deposit formation in severe hydraulic systems using high
pressure, high output pumps. The innovative ultra keep clean performance protects critical hydraulic system
components from malfunction, such as tight tolerance servo and proportional valves found in many modern
hydraulic systems. The shear stable, high viscosity index allows for a wide operating temperature range
maintaining maximum hydraulic efficiency and component protection at both low and high temperatures.
Outstanding air release properties provide an added measure of protection in systems with low residence time
helping to prevent cavitation damage and micro dieseling. The carefully selected base oil and additives allow
passing results of acute aquatic toxicity testing (LC-50, OECD 203) and the zinc free anti-wear system provides
a high degree of protection in gear, vane and piston pumps while also minimizing deposit formation.
Formulated with extensive laboratory and in-service field testing, the Mobil DTE 10 Excel series can help
provide quantifiable increases in hydraulic efficiency compared to other Mobil™ hydraulic oils. This can
translate to reduced power consumption or increased machine output, resulting in monetary savings.
In controlled laboratory efficiency testing, Mobil DTE 10 Excel was measured to provide up to a six percent
improvement in hydraulic pump efficiency compared to Mobil DTE 20 when operating in standard hydraulic
In additional laboratory and in-service field demonstrations conducted on a wide range of modern hydraulic
systems, the Mobil DTE 10 Excel series demonstrated, compared to Mobil conventional hydraulic fluids,
exceptional oil life, outlasting these fluids by up to three times, while maintaining outstanding hydraulic system
cleanliness and component protection. Mobil DTE 10 Excel also demonstrated the value of its high viscosity
index and outstanding shear stability by operating successfully in temperatures as low as -34°C and by
maintaining ISO viscosity grade.
Mobil DTE 10 Excel has also been tested in standard vane pumps under controlled conditions directly against
competitive products. At the end of the 30 minute test, Mobil DTE 10 Excel resulted in less system heat
generation and the system temperatures were measured to be 6°C-7°C less than certain competitive products
Mobil DTE 10 Excel™ Series Page 1 of 5
https://www.mobil.com/English-US/Industrial/pds/GLXXMobil-DTE-10-Excel-Series?p=1 23.06.2017
To Next Page
Loading...