Procedures for maintenance and repair
www.icetechworld.com | IceTech Dry Ice Technology | Rev 1
Page 1
2.0 PROCEDURES FOR MAINTENANCE AND REPAIR
This table includes all the procedures for maintenance and repair.
After locating procedure numbers in the table for service interval, you have to find the
procedure numbers in the table below which will lead to detailed procedures on pages
in the appendix.
Tableformaintenanceandrepairprocedures.
Procedure
no. ProcedureDescription
Referenceappendixsee
page.
1 ReplacementofliquidCO2filter+gasket.3–6
2 Replacementofdegassingfilter+gasket.7–8
3 Replacementofpistonrings.9–14
4 Replacementofhydraulicoilfilter.15–16
5
ReplacementofgasketsinØ160hydraulic
cylinder.17–20
6 Replacementofwearinsertsindiechanger.21–24
7 ReplacementofØ160hydrauliccylinder.25–32
8 ReplacementofØ50hydrauliccylinder.33–36
9 CalibrationofØ160/Ø50hydrauliccylinders.37–42
10 ReplacementofDanfossEV3/EV15valves. 43–44
11 Replacementofextruderpiston.45–50
12 ChangingAirfilter.51–54
13 ChanginghydraulicpumpRexroth.55–56
14 Changinghydraulicoilhydraulicstation.57–58
15
16
17
18
To Next Page
Loading...