iCharger 1010B - Page 20

-20-
iCharger
Synchronous Balance Charger/Discharger 1010B/106B
Maximum charge/discharge rates
When the battery voltage is more than 20V (106B: 18V), the actual charge current delivered to the battery will
automatically be limited so as not to exceed the charger’s rated charging power of 200W (106B: 180W).
Similarly, when the battery voltage is more than 4.3V (106B: 2.8V) the discharge current will be limited by the
rated discharge power of 30W (106B: 20W). The actual current will be as follows:
Maximum charge and discharge current for various battery configurations
at 250W of input power
Battery type
Cell count Rated voltage (V)
Charge current (A)
1010B / 106B
Discharge current (A)
1010B / 106B
1 3.6 10.0 / 10.0 7.0 / 5.6
2 7.2 10.0 / 10.0 4.2 / 2.8
3 10.8 10.0 / 10.0 2.8 / 1.9
4 14.4 10.0 / 10.0 2.1 / 1.4
5 18 10.0 / 10.0 1.7 / 1.1
6 21.6 9.3 / 8.3 1.4 / 0.9
7 25.2 7.9 / -- 1.2 / --
8 28.8 6.9 / -- 1.0 / --
9 32.4 6.2 / -- 0.9 / --
Li-on
10 36 5.6 / -- 0.8 / --
1 3.7 10.0 / 10.0 7.0 / 5.4
2 7.4 10.0 / 10.0 4.1 / 2.7
3 11.1 10.0 / 10.0 2.7 / 1.8
4 14.8 10.0 / 10.0 2.0 / 1.4
5 18.5 10.0 / 9.7 1.6 / 1.1
6 22.2 9.0 / 8.1 1.4 / 0.9
7 25.9 7.7 / -- 1.2 / --
8 29.6 6.8 / -- 1.0 / --
9 33.3 6.0 / -- 0.9 / --
LiPo
10 37 5.4 / -- 0.8 / --
1 3.3 10.0 / 10.0 7.0 / 6.1
2 6.6 10.0 / 10.0 4.5 / 3.0
3 9.9 10.0 / 10.0 3.0 / 2.0
4 13.2 10.0 / 10.0 2.3 / 1.5
5 16.5 10.0 / 10.0 1.8 / 1.2
6 19.8 10.0 / 10.0 1.5 / 1.0
7 23.1 8.7 / -- 1.3 / --
8 26.4 7.6 / -- 1.1 / --
9 29.7 6.7 / -- 1.0 / --
LiFe
10 33 6.1 / -- 0.9 / --