Icom GM1600 21K - Optional Battery Chargers

19
7
BATTERY CHARGING (FOR ON-BOARD USE ONLY)
■ Optional battery chargers
ï AD-109 installation
q Connect the charger’s 10-pin connector to the AD-109
desktop charger adapter’s plug.
NOTE: The 3-pin connector is not used.
w Install the adapter into the charger in the direction of the
arrow, then use the supplied 2 screws to attach the
charger adapter to the charger.
NOTE: BE CAREFUL not to catch the unused 3-pin
plug between the charger and the charger adapter.
Supplied screws
Desktop charger adapter
10-pin connector
Plug
Not used
(3-pin connector)