Need help?Do you have a question about the Icom IC-271A/E and is the answer not in the manual?
General| Image Rejection | 70 dB |
|---|---|
| IF Rejection | 70 dB |
| Supply Voltage | 13.8V DC |
| Power Supply | 13.8V DC |
| Frequency Range | 144-148 MHz |
| Mode | FM |
| RF Power Output | 10 W |
| Sensitivity | 0.25 μV (12 dB SINAD) |
| Audio Output Power | 2 W |
| Intermediate Frequencies | 2nd: 455 kHz |
Information on RF output power, emission modes, modulation systems, and carrier/sideband suppression.
Details on receiving systems, modes, frequencies, sensitivity, squelch, selectivity, and audio output.
Details on connecting AC or DC power supplies, including voltage and current requirements.
Detailed identification and description of all front panel controls and indicators.
Controls for VFO selection, RIT, offset frequency, and memory operations.
Description of antenna, ground, power, speaker, accessory, and interface ports.
Guide on tuning and understanding frequency displays in different modes.
Detailed explanation of using the tuning control for frequency adjustment.
Fine-tuning the receive frequency without altering the transmit frequency.
How to operate with repeaters using standard or custom offset frequencies.
How to select, store, and recall frequencies and modes.
Step-by-step guide to storing frequencies and modes into memory.
Setting up for SSB reception, including control adjustments.
Procedures for SSB transmission, including control settings and speaking technique.
Setting up for CW reception and transmitting using a key.
Setting up for FM reception, including squelch and meter functions.
Transmitting in FM mode, including power and MIC gain adjustments.
Troubleshooting steps for power activation and no audio output.
To Next Page
