Icom IC-A120E

6
Bluetooth® OPERATION
6-4
Disconnecting a headset Unpairing a headset
You can disconnect a headset without canceling the
pairing.
1) Open the “PAIR/CONNECT” menu.
MENU > BLUETOOTH > PAIR/CONNECT
• The connected headsets are displayed.
2) Select the desired headset to disconnect.
➥ Push [∫] or [√] and then push [ /MHz/GRP].
• “DISCONNECT” is displayed.
3) Disconnect the headset.
➥ Push [ /MHz/GRP], and then select [YES].
• The check mark “4” in the box disappears.
4) Exit the Menu mode.
➥ Push [ ].
You can unpair a Bluetooth
®
headset.
Before unpairing a connected headset , disconnect it.
1) Open the “PAIR/CONNECT” menu.
MENU > BLUETOOTH > PAIR/CONNECT
• The paired headsets are displayed.
2) Select the desired headset to unpair.
➥ Push [∫] or [√] and then push [
/MHz/GRP].
3) Unpair the headset.
➥ Select “UNPAIR” and push [
/MHz/GRP].
• The headset name disappears from the “PAIR/
CONNECT” menu.
4) Exit the Menu mode.
➥ Push [ ].