EasyManuals Logo

Icom IC-A200 Service Manual

Icom IC-A200
38 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
1 - 1
SECTION 1 SPECIFICATIONS
GENERAL
• Frequency range : 118.000–136.975 MHz
• Mode : AM (6K00A3E)
Tuning steps : 25 kHz, 50 kHz or 1 MHz
• Number of memory channels : 9
• Frequency stability : ±0.0015% (–20°C to +55°C)
• Antenna impedance : 50
• Power supply requirement : 13.75 V DC ±15% (negative ground)
• Current drain (at 13.8 V DC) :
• Usable temperature range : –20°C to +55°C; –4°F to +131°F
• Dimensions : 160 (W)
×
34 (H)
×
271 (D) mm; 6.3 (W)
×
1.3 (H)
×
10.7 (D) in
(Projections not included)
Weight (approx.) : 1.1 kg; 2.4 lb
TRANSMITTER
• Output power (at 13.8 V DC) : 7 W (Carrier power)
• Modulation : 70% (Max 98%)
• Microphone impedance : 600
• Modulation system : Low level modulation
• Spurious emissions : Less than –60 dB
RECEIVER
• Receive system : Double-conversion superheterodyne
• Sensitivity : 2 µV for 6 dB S/N (with 1 kHz, 30% modulation)
• Spurious rejection : 70 dB
• Selectivity : ±8 kHz/6 dB (min.)
±17 kHz/40 dB
±22 kHz/60 dB
• Intermediate frequencies : 1st 32.455 MHz
2nd 455 kHz
• Audio output power : 5 W with a 4
load
60 mW with a 500
load
Transmit 2.6 A
Receive
Max. audio output
600 mA
Squelched 320 mA

Other manuals for Icom IC-A200

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Icom IC-A200 and is the answer not in the manual?

Icom IC-A200 Specifications

General IconGeneral
BrandIcom
ModelIC-A200
CategoryTransceiver
LanguageEnglish

Related product manuals