Icom IC-A200 - SPECIFICATIONS; General Specifications; Transmitter Specifications; Receiver Specifications

i General
« Frequency range : 118.000~136.975 MHz
: AM (6KOOA3E)
: 25 kHz, 50 kHz or 1 MHz
« Mode
« Tuning steps
«Number of memory : 9
channels
« Antennaimpedance : 50Q
: 13.8V DC + 15%
(negative ground)
e Power supply
requirement
¢ Current drain :
Transmit
ae Max. audio output 600 mA
eceve Squelched 320 mA
¢ Usable temperature : —20°C~+55°C
range
¢ Frequency stability : + 0.0015%
(-20°C~+55°C)
¢ Dimensions : 160(W) x 34(H) x 271(D) mm
6.3(W) x 1.3(H) X 10.7(D) in
(projections not included)
SPECIFICATIONS
e Weight > 1.1 kg; 2.4 Ib
i Transmitter
© Output power : 7 W (Carrier power)
e Microphone : 600 Q
impedance
@ Receiver
e Receive system : Double-conversion
superheterodyne
« Intermediate : 1st 32.455 MHz
frequencies 2nd 455 kHz
© Sensitivity : 2uV for 6 dB S/N
(with 1 kHz, 30% modulation)
¢ Spurious rejection : —80dB
: 5W with a4Qload
100 mW with a500 Qload
¢ Audio output power
All stated specifications are approximate and subject
to change without notice or obligation.