Icom IC-A200 - Frequency Exchanging; USE Window Direct Frequency Selection

li Frequency exchanging
After selecting the STBY window frequency, push [==]
to exchange the USE window frequency for the STBY
window frequency.
Frequency exchanging can also be performed remotely
from the yoke-mounted frequency exchange switch.
HBG (26.00
Push =)
NOTE: DO NOT push and hold [=] continuously, or
the STBY window frequency disappears.
FREQUENCY SELECTION 2
i USE window frequency
selection
The USE window frequency can be selected directly
without frequency selection in the STBY window.
1) Push and hold [=] until the STBY window
frequency is hidden.
eThe yoke-mounted frequency exchange switch
cannot be used.
Push and hold
The STBY window frequency is hidden.
2) Select a desired frequency using the large and small
tuning knobs.
3) Push [=].
¢ Previous STBY window frequency appears.
“i