EasyManuals Logo

Icom IC-F34GS User Manual

Icom IC-F34GS
47 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
9
2
PANEL DESCRIPTION
DTMF AUTODIAL KEY
Push to enter the DTMF channel selection mode. Then
select the desired DTMF channel using [CH Up]/[CH Down]
keys.
After selecting the desired DTMF channel, push this key to
transmit the DTMF code.
DTMF RE-DIAL KEY
Push to transmit the last-transmitted DTMF code.
CALL KEYS
Push to transmit a 2/5-tone/BIIS ID code.
Call transmission is necessary before you call another station
depending on your signalling system.
[Call A] and/or [Call B] may be available when your system employs
selective Individual/Group calls. Ask your dealer which call is
assigned to each key.
EMERGENCY KEYS
Push and hold to transmit an emergency call.
When [Emergency Single (Silent)] or [Emergency Repeat
(Silent)] is pushed, an emergency call is transmitted without
a beep emission and LCD indication change.
If you want to cancel the emergency call, push (or push and
hold) the key again before transmitting the call.
The emergency call is transmitted one time only or repeatedly
until receiving a control code depending on the pre-setting.
TX CODE ENTER KEY (PMR or BIIS PMR operation only)
Push to enter the direct ID code edit mode, for both 5-tone
and MSK. Then set the desired digit using [CH Up]/[CH
Down]/[TX Code CH Up]/[TX Code CH Down] or 10-keypad.*
(p. 14)
*Depending on version
TX CODE CHANNEL SELECT KEY
Push to enter the direct ID code channel selection mode.
Then set the desired channel using [CH Up]/[CH Down]/
[TX Code CH Up] or [TX Code CH Down]. (p. 13)
While in ID code channel selection mode, push for 1 sec. to
enter the ID code edit mode for 5-tone and MSK. Then set
the desired digit using [CH Up]/[CH Down]/[TX Code CH
Up]/[TX Code CH Down] or 10-keypad.* (p. 14)
*Depending on version
TX CODE CHANNEL UP/DOWN KEYS
Push to select a TX code channel directly.
ID MEMORY READ KEY (PMR or BIIS PMR operation only)
Recalls detected ID codes.
Push this key, then push [CH Up]/[CH Down] for selection.
Up to 5 IDs are memorized.
Push and hold to erase the selected memorized IDs.
VOICE SCRAMBLER FUNCTION
Push to toggle the voice scrambler function ON and OFF.
IC-F34_44GT_GS-1.qxd 04.9.24 10:26 AM Page 9 (1,1)

Other manuals for Icom IC-F34GS

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Icom IC-F34GS and is the answer not in the manual?

Icom IC-F34GS Specifications

General IconGeneral
BrandIcom
ModelIC-F34GS
CategoryTransceiver
LanguageEnglish

Related product manuals