11
Bluetooth
®
OPERATION
11-8
4� Push [P2 (Up)] or [P1 (Down)] to select “Connect,”
then push [OK]�
Connect
Disconnect
PC1
Connecting
L If the Serial Port Access Authorization screen is
displayed when using a PC, accept it� See the
deviceʼs instruction manual for details.
• After the transceiver and device connection has
succeeded, “✔” is displayed beside the device icon�
Find Device
PC1 ►
Device List
5� Hold down [Back] for 1 second to return to the
standby screen�
• While connected to a Bluetooth headset, “ ” is
displayed instead of “
�”
Accepting a pairing request from a Bluetooth
®
device
NOTE: When you pair with the third party’s headset,
entering a PIN code or passkey may be required�
See the headset’s instruction manual for details�
To Next Page
Loading...
