Icom IC-F52D - Site Lock Function (for Multi-Site Trunking Operation)

7
NXDN™ OPERATION
7-15
You can lock the transceiver to the currently registered
Site� When this function is ON, the transceiver cancels
resuming a Roaming scan, and stays on the current
Site, regardless of the error rate�
Hold down [Site Lock] for 1 second to turn the Site
Lock function ON or OFF�
• “ ” is displayed when this function is turned ON�
Site Lock
ON
Trunk 1
Site Lock Backlight
Site Lock function (For Multi-site Trunking operation)