11
Bluetooth
®
OPERATION
11-6
D AF Output
(Menu > Bluetooth > Audio Select)
You can set the audio output device when a Bluetooth
headset is connected�
If Audio Select is set to “RMT & SP,” you can hear
audio from both a connected Bluetooth headset and
the transceiver’s speaker�
See page 6-13 for details�
D About the VS-3 headset
You can set the detailed settings of the optional VS-3
Bluetooth
®
headset�
• Key Beep (p� 6-13)
(Menu > Bluetooth > Key Bp (VS3))
Set a beep to sound when you push [PLAY], [FWD] or
[RWD] on the VS-3� This setting is different from the
transceiver’s beep setting� When both settings are set
to “ON,” the beeps sound on the transceiver and the
headset�
• Power Save (p� 6-13)
(Menu > Bluetooth > PWR Sv (VS3))
The Power Save function temporarily disconnects
the Bluetooth connection if no communication or
operation is performed for 120 seconds, to prolong the
VS-3’s battery life�
• PTT Beep (p� 6-13)
(Menu > Bluetooth > PTT Bp (VS3))
Set a beep to sound when you push [PTT] on the
VS-3� This setting is different from the transceiver’s
beep setting� When both settings are set to “ON,” the
beeps sound on the transceiver and on the headset�
• One-touch PTT (p� 6-13)
(Menu > Bluetooth > 1 Touch PTT)
The One-Touch PTT function enables you to switch
between transmit and receive by pushing [PTT] once�
Headset settings
To Next Page
Loading...
