Icom IC-FR3100 Sales Handbook

3-6-3 Command Table
1
11
1-
--
-3 COMMAND TABLE
3 COMMAND TABLE3 COMMAND TABLE
3 COMMAND TABLE
36
† : When the Phone Patch mode is activated from the telephone, the repeater may recognize signals from a
transceiver as being a signal from the telephone due to the sidetone function of the phone line. This will
depend on the telephone company that provides local service.
‡ : “TX Start” is prohibited from the telephone line when “Slave Enable” (the backup repeater) is activated.

Icom IC-FR3100 Specifications

General

Operating Temperature	-30°C to +60°C
Output Power	25W
Modulation	16K0F3E
Power Supply Requirement	13.8 V DC ±15%
RF Output Power	25W