Need help?Do you have a question about the Icom IC-FR5100 Series and is the answer not in the manual?
General| Frequency Range | 136-174 MHz, 400-470 MHz, 450-520 MHz |
|---|---|
| Operating Voltage | 13.8 V DC ±15% |
| Channel Spacing | 12.5/20/25 kHz |
| Operating Temperature Range | -30°C to +60°C (-22°F to +140°F) |
| Receiver Sensitivity | 0.25 μV (12 dB SINAD) |
| Modulation | 16K0F3E, 11K0F3E |
Highlights the IC-FR5100/FR6100 as Icom's first 6.25kHz digital repeaters.
Discusses flexible migration from analog to digital and digital integration possibilities.
Explains improved audio quality and doubled channel capacity with 6.25kHz spacing.
Covers superior receiver performance, dual RF modules, and 100% duty cycle operation.
Introduces 6.25kHz digital mode, FDMA, and its advantages for spectrum efficiency.
Details improved audio quality over distance compared to analog FM.
Explains tight emission masks and doubled channel capacity for narrow banding.
Comparison of functions and specifications for IC-FR5100 and IC-FR6100 models.
Details general specs like frequency, channels, power supply, and TX parameters.
Overview of the repeater's front panel controls and indicators.
Detailed explanation of buttons, dials, and indicators on the front panel.
Assigning functions to programmable keys and specific Dial key functions.
Detailed description of the D-SUB 25-pin accessory connector pins and functions.
Assigning functions to ports and selecting input/output and active logic.
Guide for installing the CS-FR5100 cloning software on a PC.
Explains repeater operation and base station receiving/transmitting procedures.
Steps for receiving signals and transmitting, including mic handling tips.
Details 16 scanning lists, display text, and scan types: OFF, Normal, Priority.
Configuration for Priority Scan, including Primary and Secondary channels.
Explains voice scrambling systems (UT-109R/UT-110R) and frequency inversion.
Details the IDAS system's 15-bit key encryption for secure communication.
Configuring repeater and transceiver modes, frequencies, and channel types.
Setting CTCSS for analogue repeaters and RAN for digital repeaters.
Chart to help correct problems not related to equipment malfunctions.
To Next Page
