Need help?Do you have a question about the Icom IC-H10 and is the answer not in the manual?
General| Brand | Icom |
|---|---|
| Model | IC-H10 |
| Category | Transceiver |
| Language | English |
Connect the supplied flexible antenna here.
Turns ON and OFF power and varies the audio level.
Selects an operating channel.
Rotate the control clockwise until noise is quieted.
Lights up in red while transmitting. Lights up in green when the channel is busy.
Opens the squelch manually to listen to a channel.
Push to transmit and release to receive.
Allows the battery pack to be removed from the transceiver.
Accept an optional CM-9L or EM-46L SPEAKER-MICROPHONE.
Sets the transmit power to HIGH or LOW.
Steps for removing and attaching the battery pack to the transceiver.
Instructions for charging the battery pack using the AC charger.
Safety warnings regarding battery handling, disposal, and charging.
Indicator for when the battery needs charging.
Instructions for connecting the flexible antenna.
Steps for attaching the belt clip to the transceiver.
Steps for receiving transmissions, including adjusting volume and checking channels.
Steps for transmitting, including power selection and speaking into the microphone.
Procedure for turning off the transceiver power.
Lists various battery packs with their voltage, capacity, and height.
Information on chargers, speaker-microphones, and encoder units.
Covers frequency, mode, temperature range, and dimensions.
Details output power for different battery types.
Details sensitivity and audio output power.
To Next Page
