EasyManua.ls Logo

Icom ic-m423g - Routine Maintenance Procedures

Icom ic-m423g
108 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
74
9
MENU SCREEN OPERATION
New2001New2001
Radio Settings items
Scan type D
The transceiver has two scan types, Normal scan and Prior-
ity scan. A Normal scan searches all Favorite channels in the
selected channel group. A Priority scan sequentially searches
all Favorite channels, while monitoring Channel 16.
•Thedefaultsettingisdifferentdependingonthetransceiverver-
sions.
D Scan resume timer
The scan resume timer can be selected as a pause (OFF)
or timer scan (ON). When OFF is selected, the scan pauses
until the signal disappears. (Default: OFF)
Priority scan
When ON is selected, the scan pauses for 5 sec-
onds and then resumes, even if a signal has been
received on any channel other than Channel 16.
• Normal scan When ON is selected, the scan pauses for 5
seconds and then resumes, even if a signal has
been received on any channel.
Dual/Tri-watch D
This item can be selected as Dualwatch or Tri-watch. (p. 21)
(Default: Dualwatch)
Channel Group D
Except for the European version, a channel group suitable
for your operating area can be selected. Depending on the
transceiver version, INT, USA, CAN, ATIS, or DSC may be
selectable.
See page 12 for details.
•ThescreenbelowshowstheU.S.Aversion.

Table of Contents

Related product manuals