26
1
7
4
10
15
18
2
8
13
5
11
16
3
9
14
6
12
17
DIGITAL SELECTIVE CALLING (DSC)
7
D Sending a Group call
L You can send a Group call to a pre-entered group address, or manually enter the address
before sending. (p. 17)
1. Push .
• The “COMPOSE OTHER” screen is displayed.
L You can also display the screen by selecting
the “Compose Other” item in the Menu
screen.
2. Select “Type,” and then push [ENT] or [DIAL].
• The “MESSAGE TYPE” screen is displayed.
3. Select “Group Call,” and then push [ENT] or
[DIAL].
• The Group call is selected, and returns to the previous screen.
4. Select “Address,” and then push [ENT] or [DIAL].
• The “ADDRESS” screen is displayed.
5. Select the group to send a Group call, and then push [ENT] or [DIAL].
L You can also select “Manual Input” to manually enter the target group.
6. Select “Channel,” and then push [ENT].or [DIAL].
7. Select the channel to assign, and then push [ENT].
L The assigned channels are preset by default.
8. Push to send the Group call.
• “Transmitting Group Call” is displayed, and
then the assigned channel is automatically
selected.
L If Channel 70 is busy, the transceiver stands
by until the channel becomes clear.
9.
10. Push
to finish the Group call.
• “Terminate the procedure. Are you sure?” is
displayed.
11. Push
to return to the operating screen.
• Returns to the operating screen.
FELLECS-TECH | inbox@fellecs-tech.com | www.fellecs-tech.com
To Next Page
Loading...
