Icom IC-PCR1000

1
INSTALLATION
3
■ AF output level selection
The received audio can be input into your computer via the
sound card.
Before inputting the received audio into the [LINE IN] con-
nector (connector name depends on your sound card), the
output level of the [EXT-SP] must be set properly. Perform as
follows:
q Remove the 8 screws from the cover as shown below.
Open the cover.
w Select the output level as shown below.
- “SPEAKER” for internal speaker.
- “PHONES” for PC sound card or headphones.
e Replace the 8 screws and cover.
r Connect an appropriate cable between IC-PCR1000 and
PC.
- Plug for [EXT-SP] is supplied with the receiver.
SPEAKER
PHONES
C
O
M
M
U
N
I
C
A
T
IO
N
S
R
E
C
E
IV
E
R
iC
-
p
c
r
1
0
0
0
IC-PCR1000
[EXT-SP]
to [LINE IN]
(depends on
your sound card)
IC-PCR10003.qxd03.1.62:41PMページ3