Icom COMMUNICATION RECEIVER IC PCR100 User Manual

INSTRUCTION MANUAL
This device complies with Part 15 of the FCC rules. Operation is sub-
ject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
iPCR100
COMMUNICATIONS RECEIVER FOR COMPUTER

Icom COMMUNICATION RECEIVER IC PCR100 Specifications

General

Brand	Icom
Model	COMMUNICATION RECEIVER IC PCR100
Category	Receiver
Language	English

Summary

System Requirements

Cautions

Installation

Hardware Installation

Guides users through the physical connection of the receiver to a personal computer and accessories.

Antenna Installation

Emphasizes the importance of antenna selection and proper installation for optimal reception.

Grounding

Explains the procedure for grounding the receiver to prevent electrical hazards and interference.

Software Installation

Provides step-by-step instructions for installing the IC-PCR100 control software on a PC.

RS-232C Port Setting

Panel Description

Basic Operation

Receiving

Guides users on turning on the receiver and adjusting audio and squelch levels for signal reception.

Setting a Frequency

Explains methods for tuning the receiver to specific frequencies using various input options.

Setting Squelch Level

Adjusts the signal threshold to reduce unwanted noise and open the squelch.

Attenuator Function

Memory Channels

Selecting a Memory Channel

Details methods for selecting specific memory channels using buttons or the memory list.

Memory Channel Programming

Guides users on entering frequency, mode, and other settings into memory channels.

Scan Operation

Programmed Scan

Explains how to set frequency ranges and initiate programmed scans.

Setting Scan Edges

Details how to define frequency ranges, modes, and steps for scanning operations.

Auto Memory Write Scan

Memory Scan

Versatile Memory Scan

Band Scope

Troubleshooting