Impressive operating status display
Never before has a hand held receiver given you
as much information as the IC-R3. Receiving fre-
quency, tuning step, memory channel number, and
more are visible on the 2-
inch* TFT color display at a
glance. In addition, the back
ground color is selectable
from 8 available colors.
*measured diagonally
TV picture receive capability
Not only can you see your operation status, you
can display broadcast visual information. NTSC M,
PAL B/G or other television systems are suppo-
erted*
1
, depending on version. You can watch TV
program at anytime, anywhere. An FM-TV picture*
1
from wireless camera*
2
can also be
displayed. Great for sporting events,
security, or amateur TV without un-
pleasant wiring. Also, the IC-R3 offers
an A/V output so you can transfer im-
ages to a TV monitor or a recording
device.
*
1
some versions do not support any of these systems
*
2
supplied from third party
Signal strength level indicator
In addition to the current style of signal strength
meters, a signal strength level indicator is adopted.
Measures signal strength levels every 0.3 sec. and
shows for up to 3 sec., the signal conditions within
the period. In addition, when
a directional antenna is
used, this function helps in
searching for signal origin,
such as fox-hunting, etc.
Simple bandscope
Want to analyze signal activity within a band?
Spectral activity can be seen on the TFT color dis-
play. The simple band scope becomes a useful tool
for finding new or interfering
signals. With the 5 selec-
table bandwidths, adjustable
to 500 kHz wide will give a
quick snapshot of activity.
Back ground color variations
Super wide frequency coverage
— 0.495–2450 MHz!
Covers from 0.495 to 2450.095 MHz of super wide
frequency range*
1
with AM, FM, wide-FM and TV
picture*
2
receive capability as standard.
*
1
some frequency ranges are inhibited with some versions
*
2
depending on picture modulation system and version
Long hours monitoring capability
A Lithium Ion battery, BP-206, comes as stan-
dard*, for more than 2 times longer operation than
other types of batteries, during full feature opera-
tion. And the adopted external DC IN terminal al-
lows you to operate with supplied AC adapter,
BC-153A/D*
(or 3.6–6.3 V DC power source), or 12 V
DC power source via the optional cigarette lighter
cable, CP-18A/E, all day long. In addition, the in-
stalled BP-206 can be charged simultaneously,
while 5.5–6.3 V DC
(more than 1 A)
is supplied.
*not supplied for some versions
To Next Page
Loading...
