SPECIFICATIONS AND OPTIONS
16
8
D BATTERY PACK
• BP-300 BATTERY PACK
Voltage: 7.2 V
Capacity: 2200 mAh (minimum), 2350 mAh (typical)
Approximate battery life*: 14.5 hours
* Operating periods are calculated under the following conditions.
TX : RX : standby = 5 : 5 : 90
D CHARGERS
• BC-241 DESKTOP CHARGER + BC-242 AC ADAPTER
To rapidly charge a single battery pack.
• BC-214N MULTI CHARGER + AD-140 CHARGER ADAPTER + BC-157S AC ADAPTER
To rapidly charge up to 6 battery packs.
D OTHERS
• OPC-656 DC POWER CABLE
Use with a 13.8 V power source instead of the power adapter. (Use with the BC-214N)
• FA-S102U ANTENNA
• MBB-5 BELT CLIP
• HM-222 SPEAKER MICROPHONE
With an Emergency key.
The HM-222 meets IP68 requirements for waterproof protection.
• VS-3 Bluetooth
®
HEADSET
The Bluetooth
®
headset with a [PTT] switch.
About the third party Bluetooth
®
headsets:
Icom has checked the PTT operation with some 3M Peltor headsets such as the WS Headset XP, WS ProTac XP
and WS Alert XP. (Compatibility not guaranteed.)
• VS-5MC PTT SWITCH CABLE + HS-94, HS-95, HS-97 HEADSET
VS-5MC: Used to connect a headset to a transceiver.
HS-94: Ear-hook type
HS-95: Neck-arm type
HS-97: Throat microphone
• HM-163MC TIEPIN TYPE MICROPHONE
+ EH-15B EARPHONE, SP-28 EAR HOOK TYPE EARPHONE, SP-26 TUBE EARPHONE
• SP-32 TUBE TYPE EARPHONE ADAPTER
For use with EH-15B.
• SP-27 TUBE EARPHONE, SP-29 EAR HOOK TYPE EARPHONE, SP-40 EARPHONE +
AD-135 EARPHONE ADAPTER
AD-135: Used to connect an earphone to the transceiver’s multi-connector.
• AD-118 ACC ADAPTER
Used to connect a headset with a Hirose-6-pin connector to the transceiver’s multi-connector.
Some options may not be available in some countries.
Ask your dealer for details.
Options
To Next Page
Loading...
