Icom IC-SAT100 - SPECIFICATIONS AND OPTIONS; General Specifications; Transmitter and Receiver Specifications

15
8
SPECIFICATIONS AND OPTIONS
Specications (Measurements made without an antenna.)
L All stated specications are subject to change without notice or obligation.
D General
• Frequency range: 1616 ~ 1626.5 MHz
• Number of channels: 240 Channels
• Type of emission: 41K7Q7W
• Duplexing method: TDD (Time Domain Duplex)
• Multiplexing method: TDMA/FDMA
• Antenna impedance: 50 Ω nominal
• Input impedance (MIC): 2.2 kΩ
• Output impedance (audio): 8 Ω
• Operating temperature range: –30˚C ~ +60˚C, –22˚F ~ +140˚F
• Power supply voltage: 7.5 V DC nominal
• Current drain: Less than 2.5 A
• Dimensions*: 57.8 (W) × 135 (H) × 32.8 (D) mm,
2.3 (W) × 5.3 (H) × 1.3 (D) inches
• Weight (approximate): 360 g, 12.7 oz with BP-300 and FA-S102U
D Transmitter
• Output power: 7.0 W maximum
• Modulation: DE-QPSK/DE-BPSK
• Channel spacing: 41.667 kHz
• Frequency stability: ±1.5 ppm
• Spurious emissions: 0.25 μW (Less than 1 GHz)
1.0 μW (More than 1 GHz)
• Audio harmonic distortion: 0.8% typical (at AF 1 kHz)
D Receiver
• Sensitivity: –116 dBm typical
• Audio output power (At 5% distortion): 1.5 W (Typical) into an 8 Ω load (Internal speaker)
1.0 W (Typical) into an 8 Ω load (External speaker)
* Projections not included.