EasyManua.ls Logo

Icom IC-SAT100 - TROUBLESHOOTING; Common Troubleshooting Issues and Solutions

Icom IC-SAT100
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17
9
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION REF.
The transceiver does
not turn ON.
The battery is exhausted.
The battery pack is not correctly attached.
Recharge the battery pack.
Correctly reattach the battery pack.
p. 6
p. 2
Little or no sound
comes from the
speaker.
Volume level is set too low. Adjust the volume level. p. 4
You cannot transmit. The battery is exhausted.
An obstacle may exist between the
satellite and transceiver.
Recharge the battery pack.
Retry transmitting in a place without
obstacles.
p. 6
p. 7
You cannot use the
keypad.
The Key Lock function is ON. Push [P2] until “Lock OFF” is displayed
to turn OFF the function.
p. 4
No beep sounds. The Key beep is set to OFF.
The audio output level is low.
Adjust the key beep level in the Menu
screen.
([OK] > Beep/Vibration > Key Beep Lv)
Rotate [VOL] to adjust the audio output
level.
p. 4
p. 4
Troubleshooting

Other manuals for Icom IC-SAT100

Related product manuals