Icom IC-SAT100M Network Setting Manual

5
Editing Network Setting
D About basic operation
To read the data from the transceiver
Select “Read ← TR” in the <Program> menu.
To write the setting data into the transceiver
Select “Write → TR” in the <Program> menu.
To reset to the transceiver default settings
Select “All Reset” in the <Program> menu.
L Connect the Main Unit and the Antenna Unit, as
shown in the illustration on page 3.
L If you select “All Reset,” the settings on the
IC-SAT100M Menu screen is also initialized.
To save the settings le to a folder on your PC
Select “Save” or “Save As...” in the <File> menu.
L If you have a data le to write to the transceiver,
select “Open...” in the <File> menu, and then
select the le.
D COM Port Searching
To Conrm the COM port number
1. Click the folder icon on the taskbar.
Click
2. Right-click “This PC,” and then click “Properties.”
1Right-click
2Click
3. Click [Device Manager].
Click
• The “Device Manager” screen is displayed.
4. Double-click “Ports (COM & LPT).”
1Double-click
2Conrm

Icom IC-SAT100M Specifications

General

Brand	Icom
Model	IC-SAT100M
Category	Radio
Language	English