9
Connecting the VE-PG4
D Connecting to the IP Network
4. In [Transceiver Connection], enter the Transceiver A (IC-SAT100M) settings to Destination Address,
Destinati
on Por
t Number
, and Co
ntrol Por
t Numb
er
. T
hen clic
k <Ap
ply>
.
2 Click
1 Enter
5. In [Transceiver Connection], click <Connect>.
• Connection Status changes to “Connecting.”
2 Conrm
1 Click
6. Do the same way in the steps 2 to 5, enter the Transceiver B (IC-SAT100M) settings.
Connecting the VE-PG4
To Next Page
Loading...
