Icom IC-SAT100M - Mounting the Transceiver

CONNECTING AND MAINTENANCE
15
5
Mounting the transceiver
To reduce vibration, place the cushion on the transceiver and put the sheet on it.
When mounting the bracket on the bottom side, attach the cushion and the sheet to the bottom of the transceiver.
When removing,
slide the transceiver
towards you while
pushing the lever
down.
Nuts
Mounting bracket
Spring washers
Mounting screws
Flat washers
Lever
IC-SAT100M
The universal mounting bracket supplied with your transceiver enables various mounting positions.
Sheet
Cushion
Self-tapping
screws