Icom IC-T90A - Tone, DTCS, and Offset Frequency Configuration

57
8
SET MODE
• Repeater tone (R TONE)
Selects the tone encoder frequency for accessing a repeater,
etc. from one of 50 available tone frequencies.
• 67.0–254.1 Hz (50 tones):
88.5 Hz (default)
•Tone squelch/pocket beep frequency (C TONE)
Selects the tone squelch or pocket beep frequency from one
of 50 available tone frequencies.
• 67.0–254.1 Hz (50 tones):
88.5 Hz (default)
[Repeater/Tone squelch tone table]
• DTCS squelch code (CODE)
Selects the DTCS squelch code from one of 104 available
codes.
• 023–754 (104 codes):
023 (default)
[DTCS code table]
• Offset frequency
(OFFSET)
Sets the offset frequency for duplex
(repeater) operation within
0–159.995 MHz range.
023
025
026
031
032
036
043
047
051
053
054
065
071
072
073
074
114
115
116
122
125
131
132
134
143
145
152
155
156
162
165
172
174
205
212
223
225
226
243
244
245
246
251
252
255
261
263
265
266
271
274
306
311
315
325
331
332
343
346
351
356
364
365
371
411
412
413
423
431
432
445
446
452
454
455
462
464
465
466
503
506
516
523
526
532
546
565
606
612
624
627
631
632
654
662
664
703
712
723
731
732
734
743
754
67.0
69.3
71.9
74.4
77.0
79.7
82.5
85.4
88.5
91.5
94.8
97.4
100.0
103.5
107.2
110.9
114.8
118.8
123.0
127.3
131.8
136.5
141.3
146.2
151.4
156.7
159.8
162.2
165.5
167.9
171.3
173.8
177.3
179.9
183.5
186.2
189.9
192.8
196.6
199.5
203.5
206.5
210.7
218.1
225.7
229.1
233.6
241.8
250.3
254.1
IC-T90A_IM.qxd 02.6.6 08:44 AM Page 60 (1,1)