5-2
M ENTERING THE ADJUSTMENT MODE
1) Connect the JIG cable to [MIC].
2) While holding down [QUICK] and [DIAL], turn ON the power to enter the Adjustment mode.
[DIAL] [QUICK] [POWER]
3) The adjustment screen is displayed.
• ADJUSTMENT SCREEN
Adjustment frequency
Adjustment value
Adjustment item name
M ADJUSTMENT MODE OPERATION
1) Push [MONI] to select the next adjustment item, and push [QUICK] to select the previous adjustment item.
2) Set or modify the adjustment value as specified, by rotating [DIAL].
3) Push [DIAL] to store the value or start automatic adjustment.
[DIAL] [QUICK][MONI]
M QUITTING THE ADJUSTMENT MODE
1) Turn OFF the power, and then remove the JIG cable from [MIC].
2) Turn ON the power again.
To Next Page
Loading...
