Icom ID-4100A

5-3
4-2 TRANSMIT ADJUSTMENTS
Select an adjustment item using [MONI]/[QUICK], and then set the adjustment value as specified using [DIAL].
ADJUSTMENT ITEM TRANSCEIVER'S DISPLAY CONDITION VALUE
REFERENCE
FREQUENCY
1
• Loosely couple the frequency counter to
the antenna connector, as shown on page
4-1.
• Transmit.
146.010 MHz
±50 Hz
TRANSMIT
OUTPUT POWER
VHF High power
2
• Connect the test equipment to the antenna
connector as shown in page 4-1.
• Transmit.
50 W
3
VHF Middle power
4
15 W
5
VHF Low power
6
5 W
7
UHF High power
8
50 W
9
UHF Middle power
10
15 W
11
UHF Low power
12
5 W
13
NOTE: The displayed adjustment frequency is only an example, and the frequency will differ depending on the transceiver version.