DV/FM Repeater List Function
The DV/FM repeater list function assists you accessing nearby
repeaters, even in areas you are visiting for the rst time. The
function searches for a nearby repeater using the repeater
memories with the GPS position information.
* To use the automatic repeater list function, the position data of the repeater is required. The ID-5100A
will be shipped with a limited number of repeater memories preprogrammed.
Dplus Reector Linking
Dplus reector link commands are added to the DR function
to
allow easy reector operation.
Use Reector, link/unlink to
Reector, echo test and
repeater information com-
mands are selectable.
SD Card Slot for Voice and Data Storage
When used with an SD card, the SD card can store various
contents
including voice memory, DV auto reply message, TX
voice
message, QSO log, RX history log and GPS log data. Memory
channels, repeater memories and other personal settings can be
saved to the SD card and can be loaded to the transceiver.
Innovation and Mobility
Taken to the Next Level
Innovation and Mobility
Taken to the Next Level
Innovation and Mobility
Taken to the Next Level
Innovation and Mobility
Taken to the Next Level
Reector commands exampleReector commands example
* Above photo shown with optional MBF-1 mount base and MBA-2 controller bracket. Some photos (screen shots) shown with optional UT-133 Bluetooth
®
unit installed.
The optional Bluetooth
®
headset, VS-3 provides hands-free communi-
cation and can remotely control the ID-5100A with three program-
mable buttons. Providing you with convenient communication in a
vehicle.
VS-3 Bluetooth
®
Headset
VS-3
Bluetooth
®
unit,
UT-133 (option)
* Optional UT-133 Bluetooth
®
unit must be installed in the ID-5100A.
Bluetooth
®
application image
Bluetooth
®
headset, VS-3 (option)
Volume UP
Volume DOWN
PTT switch
Programmable buttons
To Next Page
Loading...
Need help?
General
