Icom ID-51E

5 - 10
5-3 TRANSMIT ADJUSTMENT (Continued)
• TONE DEVIATION ADJUSTMENTS
Select an adjustment item using
/
, and then set the adjustment value as specifi ed using [DIAL].
ADJUSTMENT
ADJUSTMENT
ITEM
OPERATION VALUE
TONE DEVIATION
–
1 1) Set the power supply voltage to 7.4 V.
2) Connect a modulation analyzer to the antenna connector through
an attenuator, and then set it as;
HPF : OFF
LPF : 20 kHz
De-emphasis : OFF
Detector : (P-P)/2
3) No audio signal is applied.
–
-VHF-
[DTCS]
(FM)
[MDT]
2• While transmitting, adjust the deviation using [DIAL], and then
push
to store the adjustment value.
±0.7 to ±0.8
kHz
(FM-N)
±0.325 to
±0.425 kHz
[CTCSS]
(FM)
[MCT]
3 ±0.7 to ±0.8
kHz
(FM-N)
±0.325 to
±0.425 kHz
[DTMF]
(FM)
[MDM]
4
±3.4 to ±3.6
kHz
(FM-N)
±1.65 to ±1.85
kHz
[EURO TONE]
(FM)
[MET]
5
±3.4 to ±3.6
kHz
(FM-N)
±1.65 to ±1.85
kHz
-UHF-
[DTCS]
(FM)
[MDT]
6
±0.7 to ±0.8
kHz
(FM-N)
7 ±0.325 to
±0.425 kHz
[CTCSS]
(FM)
[MCT]
8 ±0.7 to ±0.8
kHz
(FM-N)
9 ±0.325 to
±0.425 kHz
[DTMF]
(FM)
[MDM]
10 ±3.4 to ±3.6
kHz
(FM-N)
11 ±1.65 to ±1.85
kHz
[EURO TONE]
(FM)
[MET]
12
±3.4 to ±3.6
kHz
(FM-N)
13 ±1.65 to ±1.85
kHz