Icom IP100H - Section 1 Required Equipment

DGX-IP1000C/IP100H -V1.0
1
The following equipment is required to demonstrate the system.
IP1000C
IP100H (2 units) Access point
• IEEE802.11a/g
• Recommendation:
Optional AP-90M
PC
With one of the following OSs
installed.
• Windows

8 (32/64bit)
• Windows

7 (32/64bit)
• Windows Vista

(32bit)
(Home Premium / Professional /
Ultimate (or equivalent) editions
are supported.)
IP100FS LAN cable (2 cables)
CLONING CABLES
(For IP100H, both cables are
required)
• OPC-2144
• OPC-478UC
CLONING SOFTWARE
(For IP100H)
CS-IP100H
SECTION 1 REQUIRED EQUIPMENT