EasyManua.ls Logo

ICON NordicTrack C 1000 User Manual

ICON NordicTrack C 1000
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
USER’S MANUAL
nordictrack.ca
Model No. NTL59621C.0
Serial No.
Write the serial number in the space
above for reference.
Serial Number
Decal
CAUTION
Read all precautions and
instructions in this manual before
using this equipment. Save this
manual for future reference.
To register your product and
activate your warranty today,
go to iconservice.ca.
Call toll-free 1-888-936-4266
Mon.–Fri. 7:30 a.m.–4:30 p.m. ET
(excluding holidays)
or email us at
customerservice@iconcanada.ca
Please do not contact the store.
ACTIVATE YOUR
WARRANTY
CUSTOMER CARE

Questions and Answers:

ICON NordicTrack C 1000 Specifications

General IconGeneral
BrandICON
ModelNordicTrack C 1000
CategoryTreadmill
LanguageEnglish

Summary

Warning Decal Placement

General Cautionary Instructions

Read all precautions and instructions before using this equipment and save the manual for future reference.

Specific Safety Warnings

Follow safety guidelines for operation, including holding handrails, wearing safety clips, and keeping clear of moving parts.

Important Precautions

General Usage and Safety Guidelines

Ensure proper use, consult physician, keep area clear, and use appropriate attire and equipment.

Electrical Safety and Surge Protection

Always use a UL-listed surge suppressor, keep cords away from heat, and ensure proper grounding.

Operational Safety and Handling

Follow safe operating practices, including proper handling, securing the unit, and keeping clear of moving parts.

Emergency Procedures and Maintenance Safety

Unplug before maintenance, test emergency stop, and avoid overexertion for safety.

Extended Service Plan Information

Plan Features and Benefits

Details the coverage, benefits, and advantages of the extended service plan for fitness equipment.

Before You Begin

Product Familiarization and Manual Guide

Introduction to the treadmill, manual's purpose, and familiarization with labeled parts using a diagram.

Part Identification Chart

Assembly Hardware Identification

Visual identification of screws, washers, and other small parts used for treadmill assembly.

Assembly Instructions

Assembly Prerequisites and Registration

Guidance on assembly requirements, tools, pre-assembly checks, and product registration.

Assembly Step 2: Wire Routing and Grounding

Details on routing the upright wire and connecting the ground wire during assembly.

Assembly Step 3: Attaching Right Upright

Instructions for attaching the right upright to the base using specific screws and grommets.

Assembly Step 4: Securing Right Upright to Base

Guidance on positioning and partially securing the right upright to the base with screws.

Assembly Step 5: Final Upright Attachment

Instructions for attaching both left and right uprights to the base using specified screws and washers.

Assembly Step 6: Preparing for Base Covers

Instructions for removing specific screws and identifying base covers before final attachment.

Assembly Steps 7 & 8: Handrail Installation

Detailed steps for attaching handrails to the uprights using screws and washers.

Assembly Step 9: Upright Crossbar Installation

Guidance on sliding and securing the upright crossbar between the left and right uprights.

Assembly Step 10: Console Base and Tray Attachment

Instructions for preparing the console base and attaching the left and right trays.

Assembly Step 11: Crossbar to Handrail Connection

Steps to attach the crossbar to the handrails using screws and star washers.

Assembly Step 12: Console Wiring Connections

Connecting ground wire, upright wire to console assembly and handrails.

Assembly Step 13: Console Assembly Placement

Placing the console assembly onto the handrails and securing it with screws.

Assembly Step 14: Crossbar to Console Attachment

Attaching the crossbar to the console assembly using specified screws.

Assembly Step 15: Handrail Cover Installation

Sliding and securing handrail covers onto the handrails with screws.

Assembly Step 16: Final Tightening and Base Covers

Firmly tightening all screws and pressing base covers into place to complete assembly.

Assembly Step 17: Frame Raising and Latch Crossbar

Raising the frame and attaching the latch crossbar with screws and washers.

Assembly Step 18: Storage Latch Attachment

Attaching the storage latch to the base bracket using a bolt and nut.

Assembly Step 19: Final Storage Latch Securing

Aligning and securing the storage latch to the latch crossbar, then lowering the frame.

Assembly Step 20: Final Checks and Prep

Ensure all parts are tight, remove plastic from decals, and prepare the treadmill for use.

How to Use the Treadmill

Connecting the Power Cord

Instructions for connecting the power cord, emphasizing surge protector use and proper grounding.

Console Diagram and Features

Console Features Overview

Overview of console features including wireless technology, iFit connectivity, and workout options.

How to Turn On the Power

Using the Touch Screen Interface

Guidance on interacting with the console's touch screen, including navigation and text input.

How to Set Up the Console

Wireless Network and iFit Setup

Steps to connect to a wireless network and log into or create an iFit account.

System Calibration and Updates

Procedures for checking firmware updates and calibrating the treadmill's incline system.

How to Use the Manual Mode

Starting and Controlling Manual Workouts

Steps for starting the belt, adjusting speed and incline, and monitoring progress during manual workouts.

Finishing Manual Workouts

Procedure for stopping, finishing, and saving manual workouts, and proper shutdown.

How to Use a Map Workout

Map Workout Progress and Completion

Monitoring progress during map workouts and completing them properly.

How to Use a Draw Your Own Map Workout

How to Use Distance or Time Workouts

Scheduling and Starting Workouts

Steps for adding workouts to your iFit schedule and starting them on the console.

Monitoring and Completing Workouts

Guidance on monitoring progress and properly finishing distance or time workouts.

How to Change Console Settings

Accessing and Navigating Settings

Steps to access the settings menu, navigate options, and customize units or view machine info.

Firmware Updates and Incline Calibration

Procedures for updating console firmware and calibrating the treadmill's incline system.

How to Connect to a Wireless Network

Wireless Network Setup and Management

Step-by-step guide to enabling Wi-Fi, selecting a network, and entering passwords.

How to Use the Sound System

How to Adjust the Cushions

Instructions on adjusting the treadmill's cushioning for firmness or softness.

Optional Chest Heart Rate Monitor

Information about using an optional chest heart rate monitor for improved workout tracking.

IC Information

How to Fold and Move the Treadmill

Folding the Treadmill

Step-by-step instructions on how to safely fold the treadmill for storage.

Moving and Lowering the Treadmill

Guidance on safely moving the folded treadmill and lowering it for use.

Maintenance and Troubleshooting

Routine Treadmill Maintenance

Regular cleaning, inspection, and part replacement recommendations for optimal performance.

Troubleshooting: Power Issues

Solutions for problems related to the treadmill not turning on or turning off during use.

Troubleshooting: Incline and Connectivity

Resolving issues with incline not changing and problems connecting to the wireless network.

Troubleshooting: Walking Belt Performance

Addressing problems with the walking belt slowing down or not being centered.

Troubleshooting: Belt Slip and Console Display

Solutions for walking belt slippage and issues with the console display not functioning properly.

Exercise Guidelines

Understanding Exercise Intensity and Heart Rate

Guidance on determining target heart rates for fat burning and aerobic exercise, and how to measure heart rate.

Workout and Frequency Recommendations

Advice on warming up, cooling down, training zones, and recommended exercise frequency for fitness.

Part List

Exploded Drawing A

Exploded Drawing B

Exploded Drawing C

Exploded Drawing D

Ordering Replacement Parts

Limited Warranty

Related product manuals