To Next PageTo Next PageWhat to do if the ICON PRO-FORM CARBON TLX Treadmill power turns off during use?
If your ICON Treadmill turns off during use, check the power switch; if it has tripped, wait five minutes, then press it back in. Also, ensure the power cord is plugged in; if so, unplug it, wait five minutes, and plug it back in. Another solution is to remove and reinsert the key from the console.
How to fix ICON PRO-FORM CARBON TLX Treadmill walking belt slipping?
To fix a slipping walking belt on your ICON Treadmill, remove the key and unplug the power cord. Then, use the hex key to turn both idler roller screws clockwise 1/4 of a turn.
Why ICON PRO-FORM CARBON TLX Treadmill walking belt slows when walked on?
The ICON Treadmill walking belt may slow down if an inadequate extension cord is used. Use only a 3-conductor, 14-gauge (2 mm[2]) cord that is no longer than 5 ft. (1.5 m). Also, if the walking belt is overtightened, remove the key and unplug the power cord, then use the hex key to turn both idler roller screws counterclockwise, 1/4 of a turn.
How to fix ICON PRO-FORM CARBON TLX power not turning on?
If your ICON Treadmill power does not turn on, use only a 3-conductor, 14-gauge (2 mm[2]) cord that is no longer than 5 ft. (1.5 m) if an extension cord is needed. Ensure the key is inserted into the console. Check the power switch located on the treadmill frame near the power cord. If the switch protrudes, the switch has tripped. To reset the power switch, wait for five minutes and then press the switch back in.
How to stop ICON PRO-FORM CARBON TLX Treadmill console displays from remaining lit?
The console of your ICON Treadmill may feature a display demo mode, designed for store displays. To turn off the demo mode, check your console settings.
How to stop ICON Treadmill from making a squeaking noise?
To stop your ICON Treadmill from making a squeaking noise, retighten the screws securing the uprights.
General| Weight Capacity | 300 lbs |
|---|---|
| Bluetooth | Yes |
| Decline | -3% |
| Speed | 0-12 mph |
| Display | 10" HD Touchscreen |
| Folding | SpaceSaver Design |
| Warranty | 1-Year Parts & Labor |
| Running Area | 22" x 60" (55 x 152 cm) |
Provides UK contact details for iFIT support, including website, email, and postal address.
Provides Australian contact details for iFIT support, including phone number, email, and postal address.
Instructions for registering the product and activating the warranty in the UK and Australia.
Steps for assembling the main frame, supports, uprights, and wheels using provided hardware.
Steps for attaching the console base, trays, console, and connecting internal wires and ground.
Steps for installing the storage latch, grommets, and upright covers, and final tightening of screws.
Overview of console features, turning the unit on, and turning it off.
Instructions for manual mode, iFIT workouts, and exercise guidelines for effective training.
How to change settings, use the fan, connect heart rate monitor, sound system, and fold/move the treadmill.
Guidelines for regular cleaning, inspection, and tightening of treadmill parts to ensure optimal performance.
Solutions for common problems such as power not turning on, power turning off, or squeaking noises.
Guidance on determining proper exercise intensity levels using heart rate zones for fat burning and aerobic fitness.
Step-by-step instructions on how to manually measure your heart rate during or after exercise.
Recommendations for warm-up, cool-down, training zone duration, and optimal exercise frequency for fitness goals.
