ICON Platform M+ - Assigning DAW Control Mode

38
 To begin the DAW mode setup, let make the connection of your Platform M+
with iMap. Please follow the below steps:

1. Connect Platform M+ to your Mac/PC.
2. Launch iMap and click “Connect Device”.
 Note: If your Platform M+ is not connected to your Mac/PC, the message
“There are no MIDI input devices” will appear. Please connect Platform M+ to
your Mac/PC with the provided USB cable.
3. Select “Platform M+” at the pop-up menu as your MIDI out
device.
iMap
TM
Platform M+ software panel
Diagram 7
Platform-M/X/M+
Assigning DAW mode (Mackie control/HUI)
with iMap
TM