EasyManua.ls Logo

ICONE ALLROAD - Important Usage Information; General Safety Precautions; Speed and Power Compliance; Battery and Electrical Safety

ICONE ALLROAD
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
This manual contains important information about security service and performance.
Appearance and specications are subject to change without notice in order to constantly
improve product quality.
Before using the ICONE e-Bike, please observe the warnings and precautions contained in
this manual.
If you lend the electric bicycle to others for use, let users read the instructions carefully, in
order to minimize the possibility of accidents.
Wear suitable and qualied helmets when using the E-bike.
Always wear at least one item with uorescent or reective strip when driving notes or in
suboptimal light conditions. Always check that the front and rear lights are working and that
the brakes are working properly. Turn on the lights in dark or low light conditions. If you
cannot turn on the lights, it is recommended to walk the bike by hand. In case of rain and / or
snow, brake in advance, reduce your speed, and increase the safety distance.
Acceleration is one of the main causes of bicycle accidents; do not to let go of the handlebar
to operate the display, this action must be performed only with the vehicle stationary. The
speed must be respected and the speed limit of 25 Km / h must never be exceeded even
when going downhill.
This e-Bike is made in compliance with all current regulations and in particular: The European
directive 2002/24 / EC which denes electric bicycles with pedal assistance, bicycles
equipped with an auxiliary electric motor having a maximum continuous nominal power of
250 Watts whose power is reduced and nally stopped when the vehicle reaches 25 km / h
or earlier if the cyclist stops pedaling.
The engine must never be running when the passenger stops pedaling.
This e-BIKE is made in compliance with all current regulations and in particular:
• Activation of the motor only in the presence of pedaling (pedal assistance)
• Maximum speed 25 Km/h
• Power less than 250 Watt
Do not touch the parts of the bicycle power supply and the battery, or use metal objects to
touch parts of the bike as this could cause a dangerous short circuit.
If you want to increase mileage, pay attention to the right tire pressure, try to pedal constantly
and maintain a stable speed. Brake when necessary and do not wait to be too close to the
person in front of you or to the point where you want to stop.
1. Important information

Related product manuals