9. Issues requiring attention
Whenever you ride your bicycle, you need to check the braking distances, the power
and eciency of the brake.
Warning: if the brake works abnormally, the engine can stop working.
• Respect trafc laws and regulations, never go in reverse unless in absolute safety.
• Contact professional technicians to keep the electric bicycle in maximum efciency
conditions, adjust the brake, transmission and other components regularly.
The maintenance of your e-Bike is essential to extend its life.
Always keep in mind that:
• The locking mechanism of the wheel units must not move.
• The quick release lever must be closed.
• You shouldn’t hear squeaks or creaks.
• Tires - valve position control.
• Due to the stresses and insufcient tire pressure, the tire and inner tube could move on the
rim and give rise to an oblique position of the valves. In this case, the valve base can tear
while driving, causing a sudden loss of tire pressure.
• Check the tires.
Check for the absence of external damage, foreign bodies and wear on the tires:
• The entire surface of the tire must have the original prole.
• The texture of the tire under the rubber layer must not be glimpsed.
• There must be no dents or cracks.
• Remove any foreign items (thorns, small stones, glass fragments or the like) with your hands,
or carefully using a small screwdriver. Check if air escapes after this operation. In the event
of an air leak, the inner tube must be replaced. You can replace the inner tube yourself by
following the corresponding instructions.
• Pressure control.
To Next Page
Loading...