ICONE ALLROAD - Troubleshooting Common Issues

METODO DI PIEGATURA:
• Togliere la maniglia di sollevamento.
• Rilasciare l’anello della clip di sicurezza,
• Aprire la maniglia di piegatura e piegare l’estremità superiore in basso
• Regolare la posizione.
Il metodo di piegatura del telaio è lo stesso.
Aggiungete spesso olio lubricante al dispositivo di piegatura del telaio.
4. Folding and methods of use
5. DIY technical solutions
PROBLEM POSSIBLE CAUSES SOLUTIONS
Set the switch to ON, the
indicator light does not light,
the motor does not work,
there is no electricity in the
e-Bike.
1. The battery is completely discharged.
2. The battery connection electrical
cable is loose.
3. The fuses are blown.
1. Charge the battery.
2. Adjust the cable.
3. Change the fuses
1. Charge the battery completely.
2. Change the battery.
3. Use more physical pedaling.
1. Insert the cable appropriately.
2. Change the fuses.
3. Change the charger
Contact your local vendor or service
center for help.
1. Insufficient battery capacity.
2. The battery is running low.
3. Brake continuously, pedal uphill or
upwind.
1. The connection cable is loose.
2. Fuses are blown.
3. The charger is damaged
Any problem with electrical components
The indicator light does not
come on during charging.
Other issues
The travel distance
decreases.