MIDI Channel Remap
This matrix is for remapping – changing - entire MIDI channels to different ones, or just
various data types (Pitch Bend, Channel Pressure, etc.).
Remap Type (top left) selects whether to modify the input going to or the output coming
from each Port.
Everything is assigned to MIDI Channel 1 in the default setup.
MIDI Controller Data Filter
For each MIDI port, this matrix is for filtering (removing from the datastream) any MIDI
controller on any of the 16 MIDI channels.
Filter Type (top left) selects whether to modify the input going to or the output coming
from each port.
Click where it says 0 - Bank Select (coarse) for a pop-up choice of all 128 MIDI
Controllers.
To Next Page
Loading...