_ Installation Instructions
Figure 4 / Horizontal Drain Pan
1
Electric Furnace I
Horizontal Drain Pan
(Left Hand Ai_ow)
Coil Support Bracket
(Right Hand Ai_w)
\
il Support Bracket
Coil Access Panel
\
\
Drip Flanges
(Left Hand Airflow)
Drip Flanges
(Right Hand Airflow)
Coil Support Bracket
(Left Hand Airflow)
Horizontal Drain Pan
(Right Hand Airflow)
38-20-06
Figure 5 Horizontal Installation
Field-Fabricated
L Drain Pan
I Supports MUST run parallel with blowercabinet I =_=0_,
FilterInstallation
Filters must be field supplied. The blower cabinet is set up for an
internal filter or a remote filter grille or other means may be pro-
vided. Refer to ACCA Manual D for remote filter sizing.
To install an internal filter, remove screw securing filter door and
slide filter into unit. Some filters are marked for airflow direction,
make sure arrow points towards blower if marked. Washable fil-
ters are offered as an accessory. Disposable filter sizes are listed
in Filter Static Pressure Drop Table.
442 01 2201 02