To Next Page

To Previous Page

EliteSuite™ User Manual

From the User Setup Menu (see section 0 to access), press

or use the up and down keys to scroll to the Modify

Code option and press the enter key.

Using the - keys, enter the new code for the user and

then press the enter key. The EliteSuite™ keypad will

then prompt for confirmation of the user code. Repeat the

user code and press the enter key to confirm.

Deleting User Codes

To delete a user code, follow the same procedure to

program the user code, and when the old user code is

displayed, press the force key to clear the user code.

Changing User Codes

To change a user code, overwrite the current user code with

the new value and then press the enter key.

Select PIN

[****]

Questions and Answers:

Need help?

Do you have a question about the ICT EliteSuite and is the answer not in the manual?

ICT EliteSuite Specifications

General