ID Tech MINIMAG User Manual

10
Example: To set the Track Separator to TAB, enter /e/d/fq<space>\
tab<ENTER> (13 keystrokes).
Start/End Sentinel and Track 2 Account Number Only
The MiniMag can be set to either send or not send, to invoke the Start/
End sentinel, and to send either the Track 2 account number only, or
all the encoded data on Track 2. (The Track 2 account number setting
doesn’t affect the output of Track 1 and Track 3.)
Syntax: /e/d/fv<space>b1<ENTER> where...
b1=0 Do not send start/end sentinel, but send all data on all tracks
b1=1 Send start/end sentinel and send all data on all tracks
b1=2 Do not send start/end sentinel, for any track, but send
account number on track 2 only
b1=3 Send start/end sentinel on tracks 1 and 3, and send account
number on track 2 only

ID Tech MINIMAG Specifications

General

Interface	TTL
Scan speed (max)	76.2 mm/sec
Operating voltage	5 V
Power consumption	4 mA
LED indicators	Yes
Storage temperature (T-T)	-30 - 70 °C
Operating temperature (T-T)	0 - 55 °C
Cable length	1.8 m

Weight and Dimensions

Weight	130 g
Dimensions (WxDxH)	34 x 90 x 28 mm

Summary

Limited Warranty

Limited Warranty Details

Explains ID TECH's warranty terms, obligations, and exclusions for the product.

Introduction

Introduction Description

Provides an overview of the MiniMag's capabilities, including reading tracks and data editing.

Installation

Host Connections

Details the physical connection of the MiniMag reader between the host computer and keyboard.

Configuration

Default Settings and Setup Steps

Covers initial setup, default settings, and the process for programming configuration.

General and Terminal Selections

Configures terminal type, beep volume, intercharacter delay, and general operating parameters.

Reading, Decoding, and Message Formatting

Manages reading/decoding settings and message formatting options like terminators and preambles.

Magnetic Track and Sentinel Options

Selects magnetic tracks for reading and configures start/end sentinels and track separators.

Data Editing

Data Editing Overview and Functions

Introduces the data editing feature and lists core functions like rearranging and duplicating fields.

Data Fields and Formulas

Explains how data is divided into fields and programmed using editing formulas.

Data Editing Setup Commands

Covers commands for enabling/disabling editing, defining fields, and search criteria.

Data Editing Send Command

Details the command used to transmit the edited data according to defined formats.

Operation

Operation Steps

Step-by-step guide for correctly reading a magnetic stripe card with the MiniMag.

Troubleshooting

Troubleshooting Overview and Procedures

Identifies common issues and outlines basic diagnostic steps for resolving reader problems.

Keyboard Interface Problems

Addresses potential issues with keyboard connectivity, data speed, and cable compatibility.

Appendix A: Default Settings Table

Default Magnetic Track and Communication Settings

Details the default data format for magnetic tracks and keyboard communication settings.

Appendix B: Function Code Table

Function Code Mapping

A reference table mapping characters and function keys to their corresponding keystroke codes.

Appendix C: Non-printable ASCII Characters

Non-printable ASCII Character Codes

Lists non-printable ASCII control characters and their keystroke representations.

Appendix D: Magnetic Stripe Standard Data Formats

ISO Credit Card Format

Details the data structure and fields for ISO credit cards on Track 1 and Track 2.

California Driver's License Format

Specifies the data fields and structure for California Driver's Licenses across Tracks 1, 2, and 3.

AAMVA Driver's License Format

Details the data fields and structure for AAMVA Driver's Licenses across Tracks 1, 2, and 3.

Appendix E: USB/Keyboard Interface

USB Interface Overview and Installation

Explains USB connectivity, plug-and-play, and the installation process for the reader and setup utility.

Using the ID TECH Reader Setup Utility

Guide on operating the Reader Setup Utility for sending commands and managing command history.