ID Tech MINIMAG - General and Terminal Selections

5
General Selections
This group of configuration settings define the basic operating param-
eters of the scanner.
Syntax: /e/d/fa<space>b1b2b3<ENTER> where...
Terminal Type Selections
The MiniMag can be programmed to interface to a number of different
terminal types. The terminal types supported are:
b1=0 for PC-AT
b1=1 for PS/2 Models 25 and 30
b1=2 for PS/2 Model 50
b1=3 for PS/2 Model 70
b1=4 for Macintosh
Beep Volume
The beep volume can be adjusted to two different levels, or turned off
entirely.
b2=0 for beep volume off
b2=1 for beep volume low
b2=2 for beep volume high
Intercharacter Delay
This is the time period the reader will wait before sending the next
successive character. Certain terminals and computers require an inter-
character delay to simulate their keyboard’s intercharacter delay.
b3=0 for 2 ms intercharacter delay
b3=1 for 5 ms intercharacter delay