ID Tech MINIMAG - Search Command

16
means:
Added field 1 = Idt
Added field 2 = ;
Added field 3 = \cr (carriage return)
Added field 4 = \f1(function key F1)
Added field 5 = \htITS(tab + ITS)
Data Editing Search Command
In working with a user-defined format that is not credit card, CA DMV,
or AAMVA, the MiniMag will support any combination of the follow-
ing five search methods:
Length Match: For a particular track, indicate the minimum and maxi-
mum number of characters acceptable for the data editing formula.
String Match: For a particular track, indicate a specific string of char-
acters, as well as the character position at which that string must begin,
in order to be acceptable to the data editing formula.
Search Before: For a particular track, the MiniMag will create a data
field which contains all characters that come before the specified
occurrence of a given character sequence. (For example, the second
occurrence of the character sequence ABC.)
Search Between: For a particular track, the MiniMag will create a data
field which contains all characters that come between the specified oc-
currence of one sequence of characters and another.
Search After: For a particular track, the MiniMag will create a data
field that contains the specified number of characters that come after
the specified occurrence of a given character sequence. An offset is
used to indicate that the data field starts a certain number of characters
after the searched string.