88.88
Ω
DC
P. 5/8
37
38
41
42
39
40
For each button, measure resistance value.
(Wait for a stable reading.)
For each button, record resistance value in
section C.
If some steering wheel buttons are still not
linked to a signal wire, complete External
module wiring (Identifying/Gathering
Information) section.
Go to:
www.idatalink/(link to be determined)
Fill the fields with the informations
collected and follow the instructions.
(to be determined)
PROGRAMMINGEXTRAS PREPARATIONINSTALLATION
Radio Wiring (Identifying/Gathering information)
WWW.IDATALINK.COM/SUPPORT
Automotive Data Solutions Inc. © 2012Maestro Install Guide / Vehicles not currently covered
Repeat steps 35 through 38 for each signal
wire.
To Next Page
Loading...
Need help?
General
