Ideal Boilers VOGUE MAX SYSTEM 15

Need help?

Do you have a question about the Ideal Boilers VOGUE MAX SYSTEM 15 and is the answer not in the manual?

Summary

SECTION 1 - GENERAL

1.5 Safety

1.8 Gas Supply

Details considerations for ensuring an adequate and safe gas supply for the boiler.

1.9 Flue Installation

1.14 Electrical Supply

SECTION 2 - INSTALLATION

2.8 Determining The Flue Length & Flue Packs Reqd

2.10 Installing The Flue

Details fitting the flue through the wall and installing the turret.

2.11 Condensate Drain

2.15 Connections & Filling

Details making water and gas connections and filling the system.

2.16 Electrical Connections

Covers wiring regulations and safety for electrical supply and controls.

2.22 Wiring Diagram

Presents a detailed wiring diagram of the boiler's internal and external connections.

2.23 Commissioning And Testing

Outlines electrical and gas checks and initial boiler operation steps.

2.24 Initial Lighting

Guides through preparing for and performing the initial ignition sequence.

2.25 Check CH & HW Cylinder Operation

SECTION 3 - SERVICING

3.1 Servicing Schedule

Recommends regular servicing intervals and safety precautions for engineers.

3.4 Fan And Venturi Assembly Removal And Cleaning

3.6 Burner Removal And Cleaning

3.8 Cleaning The Heat Exchanger

3.10 Replacement Of Components

Lists general safety procedures before replacing any boiler component.

3.11 Fan Replacement

3.12 Burner Injector Replacement

3.13 Burner;Door Assembly Replacement

3.14 Return Thermistor Renewal

3.15 Ignition Electrode Replacement

3.16 Flame Detection Electrode Replacement

3.17 Spark Generator Replacement

3.18 Gas Control Valve Replacement

Explains how to replace the gas control valve.

3.19 Condensate Trap Replacement

3.20 PCB Replacement

Details replacing the main PCB, including initialisation steps.

3.21 User PCB Replacement

3.24 Safety Pressure Relief Valve Renewal

3.26 Pump Head Replacement

3.27 CH Water Pressure Sensor Replacement

3.28 Flow Thermistor Replacement

3.29 Heat Exchanger Replacement

Provides instructions for replacing the heat exchanger.

3.30 Expansion Vessel Recharging And Replacement

SECTION 4 - FAULT FINDING

4.1 Fault Finding Chart Main Menu

Provides a flowchart for diagnosing and resolving common boiler faults.

4.2 Overheat Lockout

Details troubleshooting steps for overheat lockout errors.

4.3 Ignition Lockout

Guides on diagnosing and resolving ignition lockout issues.

4.4 Flame Loss

Outlines procedures for troubleshooting flame loss faults.

4.5 Thermal Fuse Lockout

Explains how to address thermal fuse lockout errors.

4.6 Flame On Before Gas Valve On

Steps to diagnose flame detection issues before gas valve activation.

4.7 Flow Thermistor Fault

Details troubleshooting for flow thermistor faults and resistance checks.

4.8 Outside Sensor Fault

Guides on diagnosing issues with the outside temperature sensor.

4.9 Return Thermistor Fault

Explains troubleshooting for return thermistor faults and resistance checks.

4.10 Fan Fault

Outlines procedures for diagnosing fan faults.

4.11 Low Water Pressure

Guides on troubleshooting low water pressure issues.

4.12 No Water Flow

Details how to diagnose and resolve "no water flow" faults.

4.13 No Connection to Primary PCB

Provides steps for troubleshooting connection issues with the primary PCB.

4.14 No CH but Cylinder Temperature OK

Guides on diagnosing central heating faults when hot water is working.

4.15 No HW but CH OK

Outlines troubleshooting for hot water faults when central heating is functional.

4.16 Blank Display

Explains how to diagnose and resolve a blank display issue on the boiler.

Code Of Practice

Standards of Work

Details requirements for competent installers and adherence to regulations.

Customer Service

Benchmark Commissioning and Servicing Section