Ideal Boilers VOGUE MAX SYSTEM 32 - User Manual

When replacing any part on this appliance, use only spare parts that you can be assured conform to the safety and performance
specification that we require. Do not use reconditioned or copy parts that have not been clearly authorised by Ideal Boilers.
For the very latest copy of literature for specification and maintenance practices visit our website idealboilers.com
where you can download the relevant information in PDF format.
February 2019
UIN 219005 A03
INSTALLATION
& SERVICING
VOGUE MAX SYSTEM 15 18 26 32

Summary

SECTION 1 - GENERAL

SECTION 2 - INSTALLATION

2.23 COMMISSIONING AND TESTING

Procedures for commissioning and testing the installed boiler.

2.24 INITIAL LIGHTING

Step-by-step guide for initial boiler ignition.

2.30 HANDING OVER

SECTION 3 - SERVICING

3.1 SERVICING SCHEDULE

Recommended schedule for routine boiler servicing.

COMPETENCE TO CARRY OUT THE CHECK OF COMBUSTION PERFORMANCE

3.10 REPLACEMENT OF COMPONENTS

3.20 PCB REPLACEMENT

Procedure for replacing the boiler's main PCB.

3.29 HEAT EXCHANGER REPLACEMENT

Procedure for replacing the boiler's heat exchanger.

SECTION 4 - FAULT FINDING

4.1 FAULT FINDING CHART MAIN MENU

4.2 OVERHEAT LOCKOUT

Troubleshooting steps for overheat lockout faults.

4.3 IGNITION LOCKOUT

Diagnostic steps for ignition lockout issues.

4.4 FLAME LOSS

Troubleshooting procedure for flame loss faults.

4.7 FLOW THERMISTOR FAULT

4.11 LOW WATER PRESSURE

4.13 NO CONNECTION TO PRIMARY PCB

4.16 BLANK DISPLAY

SECTION 5 - SPARE PARTS

Ideal Boilers VOGUE MAX SYSTEM 32 Specifications

General

Brand	Ideal Boilers
Model	VOGUE MAX SYSTEM 32
Category	Boiler
Language	English